December 15, 2017, 08:15:18 am

Recent Posts

Pages: [1] 2 3 ... 10
Forum Picture Gallery / full colour pages VF1000FE 1984
« Last post by windysolar1 on December 13, 2017, 12:05:28 pm »
Just found some pages from a center spread I got from a ebay seller a few years ago
thought someone on here would like to see them,scanned in at 600dpi full pages

To view the whole album link here       paste into address bar.

Enjoy 8)
In the Shed / Re: VF1000F2 speedo flicking around and reading high
« Last post by windysolar1 on December 11, 2017, 08:55:26 am »
you speedo cable is faulty
the wheel drive is mechanical so its not that
clocks are very reliable in my opinion
VF1000 / Re: Boldor on eBay??????????
« Last post by Viffer on December 10, 2017, 06:10:49 pm »
Yes Marmite thats what I was thinking when I viewed it, so I thought it would  be a nightmare not knowing which parts were off which model (not having enough knowledge of VF1000 and there being quite a few changes FE to FF).  Also the wiring loom under the seat looked a bit hacked at some point in the last 33 years!
Events and Meets / Re: Scottish trip
« Last post by Marmite on December 10, 2017, 12:39:43 pm »
You're probably right about the Silverwing Biff however the VF 500 would give a good account of itself ( but not in my hands).  ;D
VF1000 / Re: Boldor on eBay??????????
« Last post by Marmite on December 10, 2017, 12:36:42 pm »
My suspicion is that it might well be a "cut and shut" jobby. Im not suggesting the present owner has done this but possibly the plate ( & V5) from one was put onto the chassis of a Bol. 
In the Shed / Re: VF1000F2 speedo flicking around and reading high
« Last post by Halfmad on December 07, 2017, 07:11:35 pm »
That's odd i would think

If ya can't get it fixed i've a set from a 1987 one for sale

In the Shed / VF1000F2 speedo flicking around and reading high
« Last post by Hoges on December 06, 2017, 09:34:21 pm »
Hi all.

My 85 VF1000F2 speedo is bouncing around all over the place, and if it remains steady whilst underway will like be showing double the speed the bike is doing at the time.  Not to sure whether its a bad signal or the speedometer is on the way out.

Any thoughts as to why its doing this?
Owners Lounge / Re: How many VF's do the Forum members own ?
« Last post by usaabn on December 05, 2017, 03:20:53 pm »
The VF1000f and the always available VF750s. I still get questions about the cam issues. I always respond with the same answer...What cam issues.
VF1000 / Re: Boldor on eBay??????????
« Last post by struan65 on December 04, 2017, 11:26:59 pm »
Am currently bidding on this one.
I had  the FF in 86 through to 93 and enjoyed it, always stuck with Hondas v engines and have not been disappointed.
In the Shed / Re: Applying decals to painted panels and tank, then...clear?
« Last post by paul 810 on December 04, 2017, 08:40:07 pm »
Hi yes you are correct enough sure the paint is thoroughly clean use panel wipe or soapy water, then thoroughly dry the parts, use a good apply the decals and wear latex gloves as the grease from your fingers can cause reactions then apply the 2k laqueur, mixed to the correct ratio with activator, and I add about 10% thinners to aid putting it on, use a good hvlp gun and ensure it as a water filter fitted and a pressure gauge, I use a 1.4 needle in the gun and apply about 3 to 4 coats which will give it a good shine leave for about 24 hours and buff with fine cutting compound,  failing that get a professional to do it, the main thing is to remember mixing correctly and not putting it on to heavy I normally leave about 30 minutes between coats depending on temperature, probably alot warmer where you are
Pages: [1] 2 3 ... 10