June 23, 2017, 02:38:20 pm

Author Topic: Carb fuel pipes  (Read 98 times)

garyb

  • VF1000 Owner
  • **
  • Posts: 70
    • ICQ Messenger -
    • MSN Messenger -
    • AOL Instant Messenger -
    • Yahoo Instant Messenger -
    • View Profile
    • Email
Carb fuel pipes
« on: June 12, 2017, 05:44:04 pm »
Hi all, need to purchase a carb fuel pipe but not sure which one it is on the cmsnl parts diagram. Here is a pic:


It is for a vf1000re and is the fuel in pipe that goes from the bottom of the carbs feeding the float valves It is 10.7mm diameter and 67mm long. It looks like joint set a 16026 mb0 671 but diagram less than clear and I don't want to order wrong part. If anyone has one to sell even better would rather give money to a fellow rider than cmsnl.

Garyb
 

garyb

  • VF1000 Owner
  • **
  • Posts: 70
    • ICQ Messenger -
    • MSN Messenger -
    • AOL Instant Messenger -
    • Yahoo Instant Messenger -
    • View Profile
    • Email
Re: Carb fuel pipes
« Reply #1 on: June 13, 2017, 11:23:57 am »
Found one on david silvers site and they have the dimensions which is an improvement on cmsnl. Hopefully it is the right one they list it as 10mm x 65mm which is not the exact measurements but close enough as the only other tube that is a similar shape is much thinner. Hopefully this is the last piece of the jigsaw and I can get bike back on the road before summer is over!

Garyb